bindec
(PHP 4, PHP 5, PHP 7, PHP 8)
bindec — 二进制转换为十进制
说明
返回
binary_string
参数所表示的二进制数的十进制等价值。
bindec() 将一个二进制数转换成 int,或者出于大小的需要,转换为 float 类型。
bindec() 将所有的
binary_string
值解释为无符号整数。这是由于
bindec() 函数将其最高有效位视为数量级而非符号位。
参数
binary_string
-
要转换的二进制字符串。
binary_string
中的任何无效字符都会默认忽略。自 PHP 7.4.0 起,弃用使用任何无效字符。
警告
参数必须为字符串。使用其他数据类型会导致不可预知的结果。
返回值
binary_string
的十进制数值
更新日志
版本 | 说明 |
---|---|
7.4.0 | 传递任何无效字符现在将生成弃用通知。但仍会计算结果,就好像无效字符不存在一样。 |
示例
示例 #1 bindec() 示例
<?php
echo bindec('110011') . "\n";
echo bindec('000110011') . "\n";
echo bindec('111');
?>
以上示例会输出:
51 51 7
示例 #2 bindec() 将输入解读为无符号整数
<?php
/*
* The lesson from this example is in the output
* rather than the PHP code itself.
*/
$magnitude_lower = pow(2, (PHP_INT_SIZE * 8) - 2);
p($magnitude_lower - 1);
p($magnitude_lower, 'See the rollover? Watch it next time around...');
p(PHP_INT_MAX, 'PHP_INT_MAX');
p(~PHP_INT_MAX, 'interpreted to be one more than PHP_INT_MAX');
if (PHP_INT_SIZE == 4) {
$note = 'interpreted to be the largest unsigned integer';
} else {
$note = 'interpreted to be the largest unsigned integer
(18446744073709551615) but skewed by float precision';
}
p(-1, $note);
function p($input, $note = '') {
echo "input: $input\n";
$format = '%0' . (PHP_INT_SIZE * 8) . 'b';
$bin = sprintf($format, $input);
echo "binary: $bin\n";
ini_set('precision', 20); // For readability on 64 bit boxes.
$dec = bindec($bin);
echo 'bindec(): ' . $dec . "\n";
if ($note) {
echo "NOTE: $note\n";
}
echo "\n";
}
?>
以上示例在 32 位机器上的输出:
input: 1073741823 binary: 00111111111111111111111111111111 bindec(): 1073741823 input: 1073741824 binary: 01000000000000000000000000000000 bindec(): 1073741824 NOTE: See the rollover? Watch it next time around... input: 2147483647 binary: 01111111111111111111111111111111 bindec(): 2147483647 NOTE: PHP_INT_MAX input: -2147483648 binary: 10000000000000000000000000000000 bindec(): 2147483648 NOTE: interpreted to be one more than PHP_INT_MAX input: -1 binary: 11111111111111111111111111111111 bindec(): 4294967295 NOTE: interpreted to be the largest unsigned integer
以上示例在 64 位机器上的输出:
input: 4611686018427387903 binary: 0011111111111111111111111111111111111111111111111111111111111111 bindec(): 4611686018427387903 input: 4611686018427387904 binary: 0100000000000000000000000000000000000000000000000000000000000000 bindec(): 4611686018427387904 NOTE: See the rollover? Watch it next time around... input: 9223372036854775807 binary: 0111111111111111111111111111111111111111111111111111111111111111 bindec(): 9223372036854775807 NOTE: PHP_INT_MAX input: -9223372036854775808 binary: 1000000000000000000000000000000000000000000000000000000000000000 bindec(): 9223372036854775808 NOTE: interpreted to be one more than PHP_INT_MAX input: -1 binary: 1111111111111111111111111111111111111111111111111111111111111111 bindec(): 18446744073709551616 NOTE: interpreted to be the largest unsigned integer (18446744073709551615) but skewed by float precision
+添加备注
用户贡献的备注 5 notes
info at rickdg dot nl ¶
14 years ago
Two functions to convert 16bit or 8bit binary to integer using two's complement. If input exceeds maximum bits, false is returned. Function is easily scalable to x bits by changing the hexadecimals.
<?php function _bin16dec($bin) {
// Function to convert 16bit binary numbers to integers using two's complement
$num = bindec($bin);
if($num > 0xFFFF) { return false; }
if($num >= 0x8000) {
return -(($num ^ 0xFFFF)+1);
} else {
return $num;
}
}
function _bin8dec($bin) {
// Function to convert 8bit binary numbers to integers using two's complement
$num = bindec($bin);
if($num > 0xFF) { return false; }
if($num >= 0x80) {
return -(($num ^ 0xFF)+1);
} else {
return $num;
}
} ?>
martin at punix dot de ¶
21 years ago
## calculate binary with "shift-method" ##
<?php
function dec2bin($decimal_code){
for($half=($decimal_code);$half>=1;$half=(floor($half))/2){
if(($half%2)!=0){
$y.=1;
}
else{
$y.=0;
}
}
$calculated_bin=strrev($y);
return $calculated_bin;
}
?>
## example ##
[bin] 123 = [dec] 1111011
e.g.
123/2 = 61,5 => 1
61/2 = 30,5 => 1
30/2 = 15 => 0
15/2 = 7,5 => 1
7/2 = 3,5 => 1
3/2 = 1,5 => 1
1/2 = 0,5 => 1
(0/2 = 0 finish)
gwbdome at freenet dot de ¶
20 years ago
i think a better method than the "shift-method" is my method ^^...
here it comes:
function convert2bin($string) {
$finished=0;
$base=1;
if(preg_match("/[^0-9]/", $string)) {
for($i=0; $string!=chr($i); $i++);
$dec_nr=$i;
}
else $dec_nr=$string;
while($dec_nr>$base) {
$base=$base*2;
if($base>$dec_nr) {
$base=$base/2;
break;
}
}
while(!$finished) {
if(($dec_nr-$base)>0) {
$dec_nr=$dec_nr-$base;
$bin_nr.=1;
$base=$base/2;
}
elseif(($dec_nr-$base)<0) {
$bin_nr.=0;
$base=$base/2;
}
elseif(($dec_nr-$base)==0) {
$bin_nr.=1;
$finished=1;
while($base>1) {
$bin_nr.=0;
$base=$base/2;
}
}
}
return $bin_nr;
}
=====================================================
if you want to reconvert it (from binary to string or integer) you can use this function:
function reconvert($bin_nr) {
$base=1;
$dec_nr=0;
$bin_nr=explode(",", preg_replace("/(.*),/", "$1", str_replace("1", "1,", str_replace("0", "0,", $bin_nr))));
for($i=1; $i<count($bin_nr); $i++) $base=$base*2;
foreach($bin_nr as $key=>$bin_nr_bit) {
if($bin_nr_bit==1) {
$dec_nr+=$base;
$base=$base/2;
}
if($bin_nr_bit==0) $base=$base/2;
}
return(array("string"=>chr($dec_nr), "int"=>$dec_nr));
}
Nitrogen ¶
15 years ago
Binary to Decimal conversion using the BCMath extension..
<?php
function BCBin2Dec($Input='') {
$Output='0';
if(preg_match("/^[01]+$/",$Input)) {
for($i=0;$i<strlen($Input);$i++)
$Output=BCAdd(BCMul($Output,'2'),$Input{$i});
}
return($Output);
}
?>
This will simply convert from Base-2 to Base-10 using BCMath (arbitrary precision calculation).
See also: my 'BCDec2Bin' function on the 'decbin' document.
Enjoy,
Nitrogen.
alan hogan dot com slash contact ¶
17 years ago
The "smartbindec" function I wrote below will convert any binary string (of a reasonable size) to decimal. It will use two's complement if the leftmost bit is 1, regardless of bit length. If you are getting unexpected negative answers, try zero-padding your strings with sprintf("%032s", $yourBitString).
<?php
function twoscomp($bin) {
$out = "";
$mode = "init";
for($x = strlen($bin)-1; $x >= 0; $x--) {
if ($mode != "init")
$out = ($bin[$x] == "0" ? "1" : "0").$out;
else {
if($bin[$x] == "1") {
$out = "1".$out;
$mode = "invert";
}
else
$out = "0".$out;
}
}
return $out;
}
function smartbindec($bin) {
if($bin[0] == 1)
return -1 * bindec(twoscomp($bin));
else return (int) bindec($bin);
}
?>